Email - [email protected]
mob - 07957966094
tel - 01484 462786
Wide freestanding signs will often stay in position under their own weight. It is wise to put down a hardcore pad to sit the stone on to avoid it sinking into soft ground.
Narrow stones such as slabs will require concreting into the ground. We advise you either engage a local tradesman to install such pieces or ask us to quote for supply and installation.
Blocks are supplied on a 100mm bed suitable for building into brick or masonry walls as they are built. If your wall is brick or coursed stone it is worthwhile ensuring the dimensions of the sign will match the courses exactly to avoid ugly half courses.
We are also able to retro fit blocks to existing structures
Screw fixing - Your plaque will be drilled with countersunk holes and supplied with stainless steel screws and plastic wall plugs.
Simply offer the plaque up to the wall where it is to be fixed, mark through the holes onto the wall, remove the plaque, drill the wall to the depth and width to accept the wall plugs and then screw fix.
Hidden fixings - Your plaque will be supplied with threaded stainless steel bars fitted in the corners, a mounting template and instructions. Simply line up the template, drill the holes where indicated, fill the holes with epoxy resin (not supplied but available from B&Q) and push the sign into place. Support until set, usually 10 mins.
Plaques are intended to be either screw fixed or mounted using hidden fixings.
BLAKER STONEMASONRY LTD
WORKSHOP - Unit 4 Moll Springs Mill, Old Moll Road, Netherton, Huddersfield, West Yorkshire, HD4 7DN
POST BOX - 122 Longwood Gate, Longwood Huddersfield, West Yorkshire HD3 4US
07957966094 01484 462786
Sandstonesigns.co.uk is operated by BLAKER STONEMASONRY Ltd
Company Reg. Number 8018506
BLAKER STONEMASONRY Ltd is not vat registered and therefore does not charge vat on any goods or services.
Copyright © 2013 BLAKER STONEMASONRY Ltd
If you need any advice please don’t hesitate to get in touch, we’ll be happy to help